Power Rake 72" & 90"
  • Power Rake for skid steer loaders - Digga North America
specs

Power Rake for Skid Steer & Small Wheel Loaders

The Digga Power Rake grades, levels, rakes, and removes debris, pulverizing and preparing the ground for new seedbed, turf or to remove old lawn and weeds - all with one tool. Our Power Rake for skid steer & small wheel loaders is ideal for levelling, grading, seedbed preparation, site preparation, lawn care, golf courses, wineries, paving & contractors.

Ingenious Design

The center pivot design from above the drum ensures the drum is always center to the machine.

Minimal Maintenance

Minimal maintenance with 5 grease points and direct drive system.

Flow Rate Capability

The Power Rake is capable of running on standard flow and high flow.

Drum Durability

The Power Rake has welded on tungsten carbide teeth for durability and extra long life of the drum.

Floating Pivot

The Power Rake comes with a floating pivot for better finish on undulating ground conditions.

Multiple Harness Options

Our Power Rake comes with multiple electrical harness options (Cat/ASV 8 Pin, 14pin, Bobcat 7 pin & Plug “N” Play controller).

American made quality

Quality products manufactured in-house by Digga in America. We use only the highest grade materials and strictest quality control.

Warranty

Digga offers warranty on all Power Rakes for 12 months after purchase.

 
72" MODEL
Specs MANUAL SLEW HYDRAULIC SLEW HYDRAULIC SLEW PRO
Recommeded Flow 17 - 30GPM 17 - 24GPM 17 - 30GPM
Motor Type Eaton 6000 Series
Max Pressure 3500 psi @ 33 gpm 3500 psi @ 24 gpm 3500 psi @ 33 gpm
Max Flow - Do Not Exceed 40 gpm @ 2900 psi 24 gpm @ 3500 psi 40 gpm @ 2900 psi
Slew Angle 25°
Max Horse Power 67 hp
Drum Width 72"
Overall Width 84"
Length - Wheels Down 69.5"
Length - No Wheels 49"
Weight (Varies depending on mount) TBC
 
90" MODEL
Specs MANUAL SLEW HYDRAULIC SLEW HYDRAULIC SLEW PRO
Recommeded Flow 17 - 30GPM 17 - 24GPM 17 - 30GPM
Motor Type Eaton 6000 Series
Max Pressure 3500 psi @ 33 gpm 3500 psi @ 24 gpm 3500 psi @ 33 gpm
Max Flow - Do Not Exceed 40 gpm @ 2900 psi 24 gpm @ 3500 psi 40 gpm @ 2900 psi
Slew Angle 25°
Max Horse Power 67 hp
Drum Width 90"
Overall Width 102"
Length - Wheels Down 69.5"
Length - No Wheels 49"
Weight (Varies depending on mount) 1270lbs 1350lbs 1350lbs