Augers for Skid Steer Loaders 2.5-3.8t
Digga's drilling augers for skid steer loaders are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.
Fitted with Digga / Eaton bell motors and input housing,he innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimizing your returns.
Digga's new Halo Alignment System is the future of drilling. Located on the hood of the ring on the Drilling Drive, the Halo Alignment system eliminates the need for any spotter & ensures all holes drilled are plumb.
Digga drilling augers are backed by industry leading warranty and local factory support.
Features
- Compact Digga manufactured gearbox
- Digga designed Eaton motor
- Halo Alignment System available
- 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
- Lifetime shaft pull out warranty
- 5 year gearbox and 3 year motor warranty
- Over 30 years design and manufacturing experience
| 2,829 |
3,275 |
3,583 |
| 3,300 |
3,821 |
4,180 |
| 10-30 |
10-30 |
10-36 |
| Eaton |
Eaton |
Eaton |
| 3500 psi @ 16 gpm |
3500 psi
@ 27 gpm |
| 30 gpm @ 1800 psi |
42 gpm
@ 3100 psi |
| 34 |
34 |
55 |
| N/a |
n/a |
INCLUDED |
| 2" Hex |
2" Hex |
2" Hex |
| Optional |
Optional |
Optional |
| A4 / rC4 |
A4 / rC4 |
A4 / rC4 |
| 24" |
24" |
24" |
| 30" |
30" |
40" |
| 123 |
125 |
180 |
| 25.9" |
25.9" |
29" |
| 9.4" |
9.4" |
9.4" |
(*) Max/min drilling diameter (DIA) dependant on ground conditions.
Guide is a recommendation only.
|
 |
